This is found in front of the battery on US cars and the brake booster on UK cars, the perfect compliment to the large fuse cover above. Fuse information is laser engraved on the top surface (details taken from a UK spec 1990 model so may be different on US/CDN cars)

Fits all models TT or N/A

The Z's engine bay runs quite hot and the coolant reaches high temperatures. Fitting one of these Slam panels is not just for looks, they were developed in Japan many years ago for all Japanese cars and this concept will help reduce temps by around 3-4 degrees by forcing all the incoming cold air to feed directly towards the radiator. Stainless version to fit TT models only, please advise if you have a performance radiator, they can easily be modified should you upgrade the radiator at a later date. Comes with new stainless securing bolts and coloured washers (red, blue, silver, gold - please specify at time of ordering).

To suit the slam panels above, mainly for the looks and to hide the open space above the headlight unit, these panels realy can brighten things up! Finished in choice of either polished stainless or carbon fibre. Both options come with new stainless securing bolts and coloured washers (red, blue, silver, gold - please specify at time of ordering).

Fits all models of TT and N/A.

There are numerous fuel lines that cross the plenum and this kit reduces the number right down to just 4 connections. With fuel smells being quite common and the stock lines being old and brittle, upgrading to this full kit not only looks good but also serves a purpose. The kit consists of 2 pre-cut lengths of high pressure braided hose, 4 fitted ends, 2 rubber-lined stainless P-clips and an anodised silver hose seperator.

Fits all models of TT and N/A.

These are a FULL replacement for the stock item.They follow the original contours/lines and really look well when fitted. The sills come with a laser engraved 300ZX logo and replacement stainless steel screws.

Fits all models of TT and N/A

Replace the V6 3000 twincam strip on top of the Throttle cover with this Stainless strip with laser engraved wording in Bronze/Gold, very effective!

To match is the Twin-turbo strip usually found on the top of the Plenum, against a polished plenum it looks really well. Both are pre fitted with 3M double sided tape.

Set 1: COIL PACK CONNECTORS - 12 stainless bolts and washers for an exact fit.

Set 2: CAM COVERS - exclusive to Smithy's Place and never before available, a 2 piece 16 bolt set for the Cam covers. To retain the tapered head design of the stock bolts, this new stainless steel set comes with purpose made tapered head washers in anodised silver.

Set 3: WING BOLTS - 8 stainless bolts with coloured panel washers (red, blue, silver or gold) which replace the bolts which secure the front wings/fenders.

All kits are suitable for all models of TT and N/A.

The existing stock pipe is often very mucky and oily with the connecting hoses prone to splitting and leaking air. This new pipe in Stainless steel and choice of coloured silicone brings a fresh look to the side of the plenum, supplied with new stainless hose bands to suit.

Silicone colour choices are Blue, Red, Black and yellow - please specify at time of ordering.

Also available as above but to suit the N/A versions.

Not available anywhere else, this is yet another Smithy's Place exclusive product! We developed the tooling required for these hoses priced them below what Nissan charge, in some cases half price! All come with stainless hose bands to suit.

TT models:, some have 3 hoses and some have 4, please check your engine before ordering to ensure you have ordered the correct hoses.

N/A models: these have just 2 hoses - Hose1, Hose A2.

Usually we carry Red and Blue hoses in stock; Yellow and black by special order only.

For RHD vehicles only!

Silicone Vacuum lines, great for replacing worn/split breathers, boost lines, windscreen/washer bottle feeds etc, almost any line except petrol or oil carrying lines.

Sold by the meter or as a "full set" comprising of 3M of 4mm, 3M of 6mm and 2M of 8mm.

Red and Blue kept in stock. Yellow and black by special order only.

Smithys laser cut stainless steel battery Tie down bar is a nice simple yet functional and very "bling" product. Z shaped and complete with S/S wing nuts, it's easy to fit and makes battery removal in the future even easier without the need to remove the windscreen cowels.

This work of art will brighten up any 300ZX engine bay. It follows the exact same contours as the original plastic cover and so will fit ALL models and ALL years. Laser engraved with the wording as per OEM cover.

Comes complete with new fixing bolts/washers available in anodised red, blue, black, gold or Stainless steel - please specify at time of order.